- Home /
- Page
Staff
STAFF LIST

Engr. Dr. Olorunwa Eric OMOFUNMI
ASSOCIATE PROFESSOR / Ag. HOD
PhD, FCAI, MNIAE, MNSE, Reg.COREN
Profile
Phone: +234-8033046416
Email: olorunwa.omofunmi@fuoye.edu.ng
Office: Associate Professor and Head of Department
Summary of Profile
Engr.Dr. OMOFUNMI Olorunwa Eric hails from Idiogba in Ilaje LGA of Ondo State. He is Associate Professor and Head of Department of Agricultural and Bioresources Engineering Faculty of Engineering, Federal University Oye-Ekiti. His area of expertise is Soil, Water and Aquacultural Engineering with emphasis on Irrigation design, Soil and Water Conservation and Pond, Hatchery and Recirculatory Aquaculture Design. His research interests also include water harvesting, Fish Pond and Hatchery Construction and Management, energy as well as agricultural waste management. He obtained his Bachelor of Technology Degree in Agricultural Engineering and Mechanization at the Federal University of Technology, Akure in 1987. He proceeded to the University of Ibadan and obtained Master of Science in Agricultural Engineering (Farm Power and Machinery option) in 1991and Master of Philosophy (Soil and Water Option) in 2010. He also has a Doctor of Philosophy Degree (Ph.D) in Soil and Water Engineering from the Federal University of Agriculture, Abeokuta in Feb, 2015. He did the compulsory National Youth Service Corps (NYSC), Borno state Nigeria between 1987 and 1988. Former Chief Lecturer and Head of Departments of Mechanical Engineering and Agricultural and Bioenvironmental Engineering, Yaba College of Technology, Former Vice Chairman and Acting Chairman ApapaIganmu LGA in Lagos State. Dr. OMOFUNMI Olorunwa Eric has benefited from number of awards including Sponsored on Regional (AFRA) Training Course on Water Use Efficiency and Its Impact on Socio-Economic Factors held at Aquatide Conference Centre Gaborone, Botswama. 8 – 19th July, 2019. He has Published many research articles in both International and local Journals and has attended many Academic Conferences and Workshops within and outside Nigeria. He has supervised many undergraduate final student projects and post graduate students. He is a Member of Nigerian Society of Engineers, Member institute of Agricultural Engineers and a COREN Registered Engineer
Specialization: Soil and Water Engineering / Aquacultural Engineering
PUBLICATIONS:
1 Omofunmi, O. E., Adeleke, A. Z., Oladipo. A. S. and Adekoya, A. O. (2018). Fluid Mechanic theory with worked examples. 3rd edition, ISBN; 978-38597-7-3, Lagos Nigeria. Page: 1 - 120
2 Omofunmi, O. E. and Adeleke, A. Z. (2017). Hydraulics fluid theory with worked examples;3rd edition, ISBN; 978-35423-0-3, Lagos Nigeria. Page: 121 - 268
3 Alli, A. A and Omofunmi, O. E. (2020). TREND CONFIDENCE INTERVALS OF
PARAMETERS REQUIRED FOR CROP GROWTH MODEL (AQUACROP) OF EPE LAGOS STATE NIGERIA. .Journal of Research in Forestry, Wildlife & Environment Vol. 12(4): ISSN; 2141778. University of Markudi. http://www.ajol.info/index.php/jrfwe [University Based].pp.86 - 92
4 Oladipo, A. S., Fayose, F.T and Omofunmi, O. E. (2020. A REVIEW OF THE
PERFORMANCE OF MADE IN NIGERIA YAM PROCESSING MACHINES. Journal of Research in Forestry, Wildlife & Environment Vol. 12(4): ISSN; 2141778. University of Markudi. http://www.ajol.info/index.php/jrfwe [University Based].pp. 135 - 141
5 Olorunwa Omofunmi*, Adesola Satimehin, Abraham Oloye, and OkwunnaUmego. (2020). Effect of Landfill Leachates on Some Water Quality Indicators of SelectedSurface Water and Groundwater at Ilokun, Ado-Ekiti, Nigeria. Makara Journal of Technology (MJT). Vol 42. No. 2; ISSN:23552786. UNIVERSITA INDONESIA. http://journal.ui.ac.id/technology [University Based]. pp.72 – 78.
6 Omofunmi, O. E., Satimehin, A. A., Adeleke, A, E., Ogunleye, K.S., Oloye, A. O. and Alli, A.A. (2020). FOOD SECURITY, SUSTAINABILITY AND POST-HARVEST TECHNOLOGY AS A TRIPOD FOR NATIONAL SECURITY. . FUOYE Journal of pure and applied sciences (FJPAS).Vol.5, Issue 1; ISSN: 2616-1419. Federal University Oye-Ekiti, Nigeria. Science.fuoye.edu.ng [University Based]. pp. 68 -77
7 Omofunmi, O. E., Olasunkanmi, J. B., Ariyomo, T. O. and Ogunleye, K. S. (2020). A REVIEW OF THE IMPACTS AND MITIGATIONS OF CATFISH EFFLUENT ON THE ENVIRONMENT.. FUOYE Journal of pure and applied sciences (FJPAS).Vol.5, Issue 1; ISSN: 2616-1419. Federal University Oye-Ekiti, Nigeria. Science.fuoye.edu.ng [University Based]. pp. 33 - 41
8 Satimehin, A. A., Omofunmi, O.E. and Uzua, M.M. (2019). STATUS OF POSTHARVEST PROCESSING OPERATIONS OF SOYBEANS IN
RURAL NIGERIA: A CASE STUDY OF BENUE NORTH-WEST SENATORIALZONE. Vol. 31(2). ISSN: 26725940. Ladoke Akintola Journal of Engineering and Technology. www.laujet.com. [University Based]. pp. 70 - 80
9 Satimehin, A. A., Omofunmi, O. E., Adegoke A. O., Oloye, A. O. (2019). A TECHNICAL SURVEY OF POST HARVEST PROCESSING OPERATIONS OF CASSAVA IN EKITI STATE, SOUTH-WEST NIGERIA. Vol. 31(1). ISSN: 26725940. Ladoke Akintola Journal of Engineering and Technology. www.laujet.com. [University Based]. pp. 13 – 25
10 Omofunmi, O. E., Olasunkanmi, J. B., Ogunleye, K. S., Ilesanmi, O.A.,Umego, O.M &Alli, A. A. (2019).BASIC AND TECHNICAL CONSIDERATIONS FORRECIRCULATORY AQUACULTURAL SYSTEMS. FUOYE Journal of Agriculture and Human Ecology.FUOJAHE, Vol. 3 (1), Federal University Oye Ekiti, Nigeria. agriculture.fuoye.edu.ng. [University Based]. pp. 8 – 19
11 Ariyomo, T. O; Omofunmi, O. E; Omobepade, B. P. and Ogunmola, T. P. (2019). AN EVALUATION OF THE TOXICITY OF AUTOMOBILE OIL WASH ON THE GILLS, LIVER AND SOME HAEMATOLOGICAL PARAMETERS OF Clariasgariepinus. FUOYE Journal of Agriculture and Human Ecology.FUOJAHE, Vol. 3 (1), Federal University Oye Ekiti, Nigeria. agriculture.fuoye.edu.ng. [University Based]. pp. 56 - 64
12 Olorunwa Eric Omofunmi and FolasadeAtiuadeFasiku. (2019). ASSESSMENT OF SURFACE WATER QUALITY OF ERO DAM FOR IRRIGATION PURPOSE.Vol. 31. NO. 3. ISSN: 1823-7843. Malaysian Journal of Civil Engineering. www.mjce.utm.my. [University Based]. pp. 37 - 44
13 Olorunwa Eric Omofunmi and Best AyoyimikaOmotayo. (2019). ASSESSMENT OF IMPACT OF LAND USE TYPES ON SOIL ORGANIC CARBON CONTENT IN SOUTH WEST, NIGERIA. Vol. 31. NO. 2. ISSN: ISSN 1823-7843. Malaysian Journal of Civil Engineering. www.mjce.utm.my. [University Based]. pp. 37 – 43
14 Olorunwa Eric Omofunmi, Oluwaseun Ayodele Ilesanmi and ToluwalaseOrisabinone. (2019). PERFORMANCE EVALUATION OF HYDRAULIC PARAMETERS OF A DEVELOPED DRIP IRRIGATION SYSTMS. . Vol. 31. NO. 2. ISSN: ISSN 1823-7843. Malaysian Journal of Civil Engineering. www.mjce.utm.my. [University Based]. pp. 9 - 16
15 Olorunwa Eric Omofunmi and Damilohun James Abiwo. (2019).Determination of fire performance indices of selected building materials in Nigeria. Vol. 21, No.2. ISSN: 16821130. Agricultural Engineering International: CIGR Journal. www.cigrjournal.org [Indexed in Scopus]. pp. 26 -33
16 Olorunwa Eric Omofunmi. (2019). Water loss, sediment deposition, and pond age relationships in Lagos State, Nigeria. Vol. 21, No.1. ISSN: 16821130. Agricultural Engineering International: CIGR Journal. www.cigrjournal.org(Indexed in Scopus).
Page: 268 - 273
17 Adekunle Adedeji ALLI, Olorunwa Eric OMOFUNMI and Ayodele Samuel OLADIPO. (2019). ASSESSING EFFECTS OF CLIMATE CHANGE ON TEMPERATURE TRENDSON WATER RESOURCES IN NIGERIA USING MANN KENDALL. ANNALS of Faculty Engneering, Hunedoara-International Journal of Engineering. Fascicule 1 (February/ 2019). www.annals.fih.upt.ro (University Based). Page: 274 - 279
18 Olatunde A. Oyelaran., Olorunwa E. Omofunmi., Ayeyinka O. Fagbemigun, and
Olusegun Balogun. (2018). Fuel and physiochemical properties of mango (Mangiferaindica) seed biodiesel and its blends with diesel. . Vol. 20, No.3. ISSN: 16821130. Agricultural Engineering International: CIGR Journal. www.cigrjournal.org(Indexed in Scopus)
Page: 280 - 288
19 O. E. Omofunmi, O. Ilesanmi and A. A. Alli. (2018).Assessing catfish pond effluent on
soil physicochemical properties and its suitability for crop production. AZOJETE, Vol. 14.
No. 2. ISSN: 2545-5818. University of Maiduguri. Nigeria. www.azojete.com.ng(University Based). Page: 289 - 100
20 Olorunwa Eric OMOFUNMI and Adesola Adebanjo SATIMEHIN (2018).
PERFORMANCE COMPARISON BETWEEN LOCALLY DEVELOPED AERATORS AND ITS EFFECTS ON CATFISH EFFLUENT. . ANNALS of Faculty Engneering, Hunedoara-International Journal of Engineering. Fascicule 3 (August/ 2018). www.annals.fih.upt.ro(University Based). Page: 101 - 108
21 Olorunwa Eric Omofunmi and OlaposiIssac Oladipo. (2018). Assessment of termite mound additive on soil physical Characteristics. Vol. 20, No.1. ISSN: 16821130. Agricultural
Engineering International: CIGR Journal. www.cigrjournal.org(Indexed in Scopus).
Page: 109 - 115
22 O. E. Omofunmi, and A. M. Olaniyan. (2018). Present Status and Future Prospects of Farm Mechanization and Agricultural Machinery Industry in Nigeria.VOl.49. NO. 2. ISSN: 00845841. AMA, Agricultural Mechanization in Asia, Africa, and Latin America. www.shin-norin.co.jp (Indexed in Scopus). Page: 116 - 122
23 Olorunwa Eric Omofunmi, Adesoji Matthew Olaniyan, and Olubukunola Tony
Ebietomiye. (2018). Utilisation of Water Hyacinth (Eichhorniacrassipes) as Fish Aggregating Device by Riverine Fisher folks in a South West Nigeria. Vol. 30. No. 1. ISSN: 01213784. Journal of Livestock Research for Rural Development (LRRD). www.lrrd.cipav.org.co or www.lrrd.org/lrrd30/1 (Indexed in Scopus). Page: 123 - 131
24 Olorunwa E.Omofunmi, Oluwaseun A. Ilesanmi and A. A. Alli. (2018). Irrigation Practice and its ManagementProgamme in Benin-Owena River BasinDevelopment Authority, Nigeria. Journal of Engineering and Technology (FUOYEJET), Vol. 3, Issues 1.ISSN: 2579-0625. Federal University Oye-Ekiti, Nigeria. engineering.fuoye.edu.ng (University Based). Page: 132 - 136
25 Omofunmi, O. E; Rosulu, A. O; Oketayo, O. O and Oloye, A. O. (2017). Assessment of Land Suitability for Crop Production and Irrigation: A Case Study of Yaba College of Technology Farm Land. FUOYE Journal of pure and applied sciences (FJPAS).Vol.2, Issue 1; ISSN: 2616-1419. Federal University Oye-Ekiti, Nigeria. Science.fuoye.edu.ng (University Based). Page: 137 - 145
26 Omofunmi, O. E, Olasunkanmi, J. B. and Akinsorotan, A. (2017). Assessing the Impacts of Catfish Pond Effluents Discharge on Subsurface Water in Nigeria.Journal of Agriculture and Human Ecology (FUOJAHE), Vol, 1 (2); Federal University Oye-Ekiti, Nigeria; agriculture.fuoye.edu.ng (Universty Based). Page: 157 - 164
27 Omofunmi O. E., J. K Adewumi, W. O. Elegbeleye and A. F. Adisa, (2017). Development
of a Paddle-Wheel Aerator for small and medium fish farmers in Nigeria. AMA, Agricultural Mechanization in Asia, Africa, and Latin America. VOl.48.No.1. ISSN: 00845841. www.shin-norin.co.jp (Indexed in Scopus). Page: 165 - 169
28 O. E. Omofunmi ,J. G. Kolo, A. A. Alli and A. S. Ojo. (2017). A Preliminary Study on
Termite Mound Soil as Agricultural Soil for Crop Production in South West, Nigeria. AZOJETE, Vol. 13. No.4. ISSN: 2545-5818. University of Maiduguri. Nigeria. www.azojete.com.ng.(University Based). Page: 170 - 178
29 O.E. Omofunmi, A.F.Adisa, S. O. Alegbeleyeand A.O.Oloye. (2017).Impacts of Catfish
Effluents on water quality Parameters of Majidun stream, South-West, Nigeria. AZOJETE,
Vol. 13. No.3. ISSN: 2545-5818. University of Maiduguri. Nigeria. www.azojete.com.ng.
(University Based). Page: 179 – 189
30 O. E. Omofunmi., J. G. Kolo., A. S. Oladipo., P. D. Diabana, and A. S. Ojo. (2017). A
Review on Effects and Control of Seepage through Earth-fill Dam. Current Journal of Science and Technology (CJST), Vol.22, Issue 5. ISSN: 2231-0843.
http://www.sciencedomain.org/issue/2840(Other). Page: 190 – 200
31 Olorunwa E. Omofunmi, Alex F. Adisa, Olusegun A. Elegbeleyeand Oluwaseun
- Ilesanmi. (2017). Assessment of Catfish Effluents Management in Lagos State, Nigeria.Journal of Engineering and Technology (FUOYEJET), Vol 2 Issues 2.ISSN: 2579-0625. Federal University Oye-Ekiti, Nigeria.engineering.fuoye.edu.ng (University Based). Page: 201 – 204
32 Omofunmi O.E.,J.K.Adewumi, A. F. Adisa and S.O.Elegbeleye (2016). Evaluation of the
impact of wastewater generated from catfish ponds on the quality of soil in Lagos, Nigeria. Annual Research and Review in Biology. Vol. 9, Issue 5. ISSN: 2347-565X
http://www.sciencedomain.org/issue/1521. (Indexed in Scopus). Page: 205 – 211
33 Omofunmi, O. E.,J. K. Adewumi, A. F. Adisa and S. O. Elegbeleye. (2016). The impact of
catfish farming on water quality of stream in Lagos State, Nigeria. Annual Research and Review in Biology. Vol. 9, Issue 5. ISSN: 2347-565X
http://www.sciencedomain.org/issue/1521(Indexed in Scopus). Page: 212 – 222
34 O. E. Omofunmi and O. A. Olorunnisola. (2016). Technical assessment on the operational
Performances of fish pond in Lagos State, Nigeria. Annual Research and Review in Biology.
Vol.10. No. 3. ISSN: 2347-565X
http://www.sciencedomain.org/issue/1521(Indexed in Scopus). Page: 223 – 232
35 O. E. Omofunmi., H. C.Agwagu and A. L. Atuche. (2016). Assessment of Medical Waste Management in Private Hospital. Journal of Engineering and Technology (FUOYEJET), Vol 1 Issues 1. ISSN: 2579-0625. Federal University Oye-Ekiti, Nigeria. engineering.fuoye.edu.ng (University Based). Page: 233 – 237
36 O. E. Omofunmiand O. A. Olorunnisola.(2016). Assessment of physical and chemical parameters of modal soil in relation to pond setting and productivity in Lagos state, Nigeria. Journal of Agriculture and Environment, VOL.16 (2). ISSN: 2315-7453. Federal University of Agriculture, Abeokuta, Nigeria. www. journal.unaab.edu.ng (University Based)
Page: 238 – 250
37 O. E. Omofunmi. (2016).The Preliminary Study on the Suitability of African Catfish Effluent as Irrigation Water Source in South West Nigeria. Journal of Agriculture and
Environment.VOL.16 (2). ISSN: 2315-7453. Federal University of Agriculture, Abeokuta, Nigeria. www. journal.unaab.edu.ng (University Based). Page: 251 – 263
38 O. E. Omofunmi,J.K.Adewumi, A. F. Adisa and S.O.Elegbeleye. (2016). Performance Evaluation of a developed paddle-wheel aerator on catfish effluent in Lagos State, Nigeria. Journal of Agricultural and Environment, VOL. 16 (1). ISSN: 2315-7453. Federal University of Agriculture, Abeokuta, Nigeria. www. journal.unaab.edu.ng. (University Based)
Page: 264 - 274
39 O. E. Omofunmi. (2016). Basic and Technical consideration on pond design and construction. British Journal of Applied Science and Technology.VOL.15. Issue 4.ISSN: 2231-0843 www.sciencedomain.org(Other). Page: 275 - 284
40 Omofunmi, O.E.,Tanimola, O. A. and Oyekunle, O. O. (2016). To assess the impact of Discploughweight and draught on physical properties of sandy loam soil. Journal of Agricultural and Veterinary Sciences. Vol. 9. Issue 2. ISSN: 2319-2372. http://www.iosrjournals.org/iosr-javs/pages/9(2) Version-1.html(Other). Page: 285 - 290
41 O. E. Omofunmi and A, A. Alli (2016). Performance evaluation and comparison studies on drying characteristics of sliced plantain and maize. British Journal of Applied Science and
Technology. VOL. 15. Issue 4. ISSN: 2231-0843. www.sciencedomain.org(Other)
Page: 291 - 297
42 O. E. Omofunmi., S. A. Ebifemi, and A. B. Eweina. (2016). Design of Water Hyacinth
(Eichhoniacrassipes) Harvester. Journal of Scientific Research &Report 10 (5). ISSN: 2320-0227. www.sciencedomain.org. (Other). Page: 298 – 307

Engr. Babatope Albert ALABADAN
PROFESSOR
PhD, MNIAE ,MNSE, Reg. COREN
Profile
Email: albert.alabadan@fuoye.edu.ng
Office: Professor
Summary of Profile
Professor ALABADAN, Babatope Albert was employed by the Federal University of Technology Minna from 1991 till 2014 when he moved his services to the Federal University, Oye-Ekiti. He has served in several administrative appointments and responsibilities, participated in the review of a number of academic and professional journals and published extensively in reputable journals. He is a dexterous academician and consultant with keen interest in Structures and Environment. He was promoted to the rank of Professor of Agricultural Engineering in 2009. Added to his pool of desirable academic credentials, was also a Certificate in Research and Development in Postharvest Practices obtained from Research Institute, Volcanic Campus, Bet Dagan, Israel in 2007.
He is a man of many parts and his experience spans both academic and professional teaching. He is a Member of the Nigerian Institution of Agricultural Engineers; Member, Nigerian Society of Engineers; a COREN Registered Engineer and a certified German Technical Cooperation/Competency Based Economies for the Formation of Enterprise National trainer.
Specialization:Structures and Environmental Engineering
Publications:
- Alabadan B. A. (2005). Transient Temperature Gradients in Stored Maize Bulk. Assumption University (AU) Journal of Technology, 8(3):146-152
- Alabadan B. A. (2006). Evaluation of Wooden Silo during Storage of Maize (Zea mays) in Humid Tropical Weather. Agricultural Engineering International, the International Commission of Agricultural Engineering (CIGR) E-journal. BC 05 013: vol. VIII. (2006) mail; ling_wang@ncsu.edu
- Alabadan B.A., M. O. Sunmonu and T. O. Sunmonu (2008). Effect of Packaging Materials on some Nutritional Qualities of Fruits and Vegetables Stored in a Passive Evaporative Cooler. Asian Journal of Food and Agro-Industry. 1 (03): 184 -196 Website; ajofai.info
- Ojigi M.L., Alabadan B.A. and S.E. Adebayo (2009). Farmstead Planning for Federal University of Technology, GidanKwano Campus, Minna, using Geographic Information System (GIS). Nigerian Journal of Surveying and Geoinformatics. 2(2): 53-67.
- Alabadan B.A., Musa J. J. and L. Enemaku (2012). Studies on Lime treated Termite Mound Soil as a low cost and Energy efficient Alternative Building Material. Nigerian Journal of Soil and Environmental Research. ABU Zaria. 10:14-18
- Oloye, A. O., Omofunmi, O. E., Alabadan, B. A., Ajisegiri, E. S. A., Ilesanmi, O. A. and Musa, M. T. (2018). Impact Assessment of different Water Sources on the Production and Acceptability of Sorghum-based Beverage. FOUYE Journal of Pure and Applied Sciences. 3(1): 148 – 154

Engr. Adesoji Mathew OLANIYAN
PROFESSOR
PhD, MNIAE, MNSE, Reg.COREN
Profile
Engr. Adesoji Matthew OLANIYANPhD
Phone: -234(0)8037613132; +234(0)8156605440
Email: adesoji.olaniyan@fuoye.edu.ng
Position: Professor
Profile Summary
Professor Adesoji Matthew OLANIYAN graduated with B.Eng, M.Eng and PhD in Agricultural Engineering from University of Ilorin, Nigeria in 1991, 1998 and 2006 respectively. Since 1998, he has been working on techniques, processes and equipment for transforming agricultural and bioresources materials into food, fibre and industrial products. Prof. Olaniyan’s principal area of research is Bioresource Handling and AgroFood Processing Engineering, where he has carried out a number of projects and published a number of papers in local and international journals. He joined the service of the University of Ilorin in 1998 as an Assistant Lecturer in the Department of Agricultural and Biosystems Engineering and rose to the position of a Senior Lecturer in 2009. He was appointed as Associate Professor and Head, Department of Agricultural and Bioresources Engineering, Federal University, Oye Ekiti in February, 2014 - a position he held for 4 years (2014-2018). Presently, he is a Professor (with research focus on Bioresource Handling and AgroFood Processing Engineering) in the Department of Agricultural and Bioresources Engineering, Federal University, Oye-Ekiti, Nigeria. Prof. Olaniyan has bagged several awards including the Award for the Best Paper (2007) in the Journal of Food Science and Technology, Mysore, India; Chinese Government Sponsorship (2008) for International Training Programme in Protected Agriculture at International Exchange Centre, Yangling, China; Netherlands Fellowship Programme (2009) for International Training programme in Milk Processing at Practical Training Centre, Onkerk, the Netherlands; Postdoctoral Fellowship (2011) of the Academy of Sciences of Developing Countries; and MASHAV Sponsorship (2016) for International Research and Development Courses on Postharvest Physiology, Pathology and Handling of Fresh Commodities, Institute of Postharvest and Food Sciences, Volcani Centre, Israel.
Specialization: Bioresource Handling and AgroFood Processing Engineering,
Publications
1 Olaniyan, A.M.; Omoleyomi, B.D. and Sunmonu, M.O. (2018). Process of Modelling and Optimizing the Osmotic Dehydration Pre-treatment of Okra Drying. Notulae Scientia Biologicae, 10 (4):493-497. Published by Academic Press on behalf of the Horticulture and Forestry Society of Transylvania.
2 Fayose, F.; Adejuyigbe, S.; Alabadan, B.; Olaniyan, A.M.; Babalola, T.; Ogunjimi, S.; Aladejebi, O.; and Olorunfemi, B. (2018). Design of a Cooling System for a Food Extruder. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 9 (4): 211-217.
3 Omofunmi, O.E.; Olaniyan, A.M. and Ebietomiye, O.T. (2018). Utilisation of Water Hyacinth (Eichhorniacrassipes) as Fish Aggregating Device by Riverine Fisher Folks in a South West Nigeria Community. Livestock Research for Rural Development, 30 (1).http://www.lrrd.org/lrrd30/1/omof30009.html.(Indexed in SCOPUS).
4 Omofunmi, O.E. and Olaniyan, A.M. (2018). Present Status and Future Prospects of Farm Mechanization and Agricultural Machinery Industry in Nigeria.Agricultural Mechanization in Asia, Africa and Latin America, 49 (2): 118-124.(Indexed in SCOPUS).
5 Ajala, E.O.; Olaniyan, A.M.; Aberuagba, F.; Ajala, M.A.; and Odewole, M.M. (2018). One-Pot Synthesis of Biodiesel from High FFA Shea Butter in an Optimization Study using Response Surface Methodology. Biofuels, DOI: 10.1080/17597269.2017.1416523.https://doi.org/10.1080/17597269.2017.1416523. (Indexed in SCOPUS).
6 Akubude, V.C.; Maduako, J.N.; Egwuonwu, C.C.; Olaniyan, A.M.; Ajala, E.O.; Ozumba, C.I. and Nwosu, C. (2018). Effect of Processing Parameters on the Expression Efficiency of Almond Oil in a Mechanical Expression Rig. Agricultural Engineering International: CIGR Journal, 20 (1): 109-117. Published by the International Commission of Agricultural and Biosystems Engineering. (http://www.cigrjournal.org). (Indexed in SCOPUS).
7 Ajala, E.O.; Aberuagba, F.; Olaniyan, A.M.; Ajala, M.A.; Sunmonu, M.O. and Odewole, M.M. (2018). Design, Construction and Performance Evaluation of a Mini-Scale Batch Reactor for Biodiesel Production: A Case Study of Shea Butter. Songklanakarin Journal of Science and Technology, 40 (5): 1066-1075. Published by Price of Songkla University, Thailand http://www.stst.psu.ac.th. (Indexed in SCOPUS).
8 Olaniyan, A.M.; Olawale, T.T.; Alabi, K.P.; Adeleke, A.E. and Oyeniyi, S.K. (2017). Design, Construction and Testing of a Biogas Reactor for Production of Biogas using Cassava Peel and Cow Dung as Biomas. Arid Zone Journal of Engineering, Technology and Environment, 13 (4):478-488. Published by the Faculty of Engineering, University of Maiduguri, Maiduguri, Nigeria.
9 Olaniyan, A.M.; Karim, R.O. and Eromosele, E.O. (2017). Design and Development of a Small-Scale Peanut Roaster. The Journal of the Association of Professional Engineers of Trinidad and Tobago, 45 (2). 34-39. Published by the Association of Professional Engineers of Trinidad and Tobago, West Indies. ISSN 1000 7984.
10 Odewole, M.M. and Olaniyan, A.M. (2017). Process Modelling and Optimization of Osmotic Dehydration Assisted Drying of Red Bell Pepper. Nigerian Journal of Technological Research, 12 (1): 32-45. Published by Faculty of Engineering, Federal University of Technology, Minna, Nigeria.
11 Olaniyan, A.M.; Adeoti, J.A. and Sunmonu, M.O. (2017). Effect of Foaming Agent, Foam Stabilizer and Whipping Time on the Drying Process of Tomato Paste under Different Drying Equipment. International Journal of Modelling, Simulation and Scientific Computing, 8 (2): 17004-1 – 17004-15. Published by World Scientific Publishing (www.worldscientific.com).
12 Ajala, E.O.; Aberuagba, F.; Olaniyan, A.M. ;Ajala, M.A. and Sunmonu, M.O. (2016). Optimization of Two-Stages Process for Biodiesel Production from Shea Butter using Response Surface Methodology.Egyptian Journal of Petroleum (In Press).Available online at http://dx.doi.org/10.1016/j.ejpe.2016.11.005.Published by Elsevier.(Indexed in SCOPUS)
13 Akubude, V.C., Maduako, J.N., Egwuonwu, C.C., Olaniyan, A.M., Ozumba, I.C., Nwosu, C. and Ajala, E.O. (2016). Effect of Process Parameters on Oil Yield Mechanically Expressed from Almond Seed using Response Surface Methodology. International Journal of Food Science and Agricultural Chemistry, 1 (1): 1-8. http://www.openscienceonline.com/journal/ijfsac.
14 Owolabi, A.B.; Olaniyan, A.M.; Awu, J.I. and Oyewole, S.N. (2016). Predicting the Level of Postharvest Losses of Rice along the Food Value Chain using Artificial Neural Network. Current Research on Agriculture and Life Science, 34 (1): 41-47. Published by the Institute of Agricultural Science and Technology, Kyungpook National University, South Korea (http://www.crals.org).
15 Ajala, E.O.; Aberuagba, F.; Olaniyan, A.M. and Onifade, K.R. (2016). Optimization of Solvent Extraction of Shea Butter (VitellariaParadoxa) using Response Surface Methodology and its Characterization. Journal of Food Science and Technology, 53 (1): 730-738. Published by Springer. Available online at http://link.springer.com/article/10.1007/s13197-015-2033-7(Indexed in SCOPUS).
16 Alabi, K.P.; Olaniyan, A.M. and Odewole, M.M. (2016). Characteristics of Onion under Different Process Pretreatments and Different Drying Conditions. Journal of Food Processing and Technology, 7 (2): 555-561 (http://dx.doi.org/10.4172/2157-7110.1000555).
17 Odewole, M.M. and Olaniyan, A.M. (2016). Effect of Osmotic Dehydration Pretreatment on Drying Rate and Post-drying Quality Attributes of Red Bell Pepper (Capsicum annuum).Agricultural Engineering International: CIGR Journal, 18 (1): 226-235 (http://www.cigrjournal.org). Published by the International Commission of Agricultural and Biosystems Engineering. (Indexed in SCOPUS).
18 Ajala, E.O.; Aberuagba, F.; Olaniyan, A.M. and Onifade, K.R. (2015). Enzymatic Extraction of Shea Butter: Optimization using Response Surface Methodology. Journal of Food Process Engineering, Doi:10.1111/jfpe.12329. Published by Wiley Periodicals, Inc. (In Press). (Indexed in SCOPUS).
19 Sunmonu, M.O.; Ogbonaya, C.; Orhevba, B.A. and Olaniyan, A.M. (2015). Optimization of Storage Parameters of Selected Fruits in Passive Cooling Structures. Nigerian Journal of Technological Research, 10 (2): 23-26. Published Faculty of Engineering, Federal University of Technology, Minna, Nigeria
20 Olaniyan, A.M.; Sunmonu, M.O.; Odewole, M.M.; and Ige, O.O. (2015). Process Conditions Governing the Drying Rate and Quality of Tomato Powder obtained from Foam-Mat Dried Tomato Powder. Ukranian Journal of Food Science, 4 (3): 423-430. Published by National University of Food Technologies, Ukraine.
21 Ajala, E.O.; Aberuagba, F.; Olaniyan, A.M. and Onifade, K.R. (2015). Comparative Study of Acid-Base Catalyzed Processes of Biodiesel Production using High FFA Shea Butter. Journal of Basic and Applied Research International, 11 (2): 87-96. (www.ikpresss.org); (ISSN: 2395-3438 (Print), 2395-3446 (Online)). Published by International Knowledge Press, Spinningfields, UK. Available online at:http://www.ikpress.org/abstract/4431#.Vgj6sqP-SSo.
22 Olaniyan, A.M. and Omoleyomi, B.D. (2014). Conceptual Design of Tomato Dryer: Fabrication and Testing of Prototype. International Journal of Postharvest Technology and Innovation, 4 (2): 114-124. Published by Inderscience Publishers (http://www.inderscience.com).
23 Olaniyan, A.M.; Sunmonu, M.O. and Alabi, K.P. (2014). Development of an Anaerobic Digestion Unit for Biogas Production from Cow Dung Substrate.Journal of Agricultural Science and Technology A, 4 (41): 743-749. Published by David Publishing Company, USA.ISSN 1939-1250.
24 Odewole, M.M.; Olaniyan, A.M. and Olalekan, L.A. (2014). Effect of Osmotic Dehydration Pretreatments and Drying Temperature on Drying Rate and Quality of Mango Chips.Journal of Agricultural Engineering and Technology, 22 (3): 21-34. Published by the Nigerian Institution of Agricultural Engineers.
25 Idah, P.A.; Obajemihi, I.O.; Adeboye, A.O. and Olaniyan, A.M. (2014). Assessment of Osmotic Pre-Drying Treatment on Drying Rates of Fresh Tomato Fruits.Nigerian Journal of Technological Development, 11 (1): 22-26. Published by Faculty of Engineering and Technology, University of Ilorin, Ilorin, Nigeria.
26 Sunmonu, M.O.; Olaniyan, A.M. and Aduba, J.J. (2014). Development and Evaluation of Empirical Models for the Prediction of Selected Antioxidants in Stored Oranges.Agricultural Engineering International: CIGR Journal, 16 (2): 151-156. (http://www.cigrjournal.org). Published by the International Commission of Agricultural and Biosystems Engineering (Indexed in SCOPUS).
27 Oyeleke, F. I.; Olaniyan, A.M.; Sunmonu, M. O. and Oyeniyi, S.K. (2014). Development of a Fruit Washing Machine.Journal of Agricultural Engineering and Technology, 22 (1): 29-36. Published by the Nigerian Institution of Agricultural Engineers.
28 Olaniyan, A.M. and Alabi, A.A (2014). Conceptual Design of Column Dryer for Paddy Rice including Fabrication and Testing of Prototype. International Journal of Basic and Applied Sciences, 2 (3): 11-20.Published by InsanAkademika Publications, Thailand.P-ISSN 2301-4458; E-ISSN 2301-8038.
29 Adeboye, O.A.; Iyanda, R.A.; Yusuf, K.A.; Olaniyan, A.M. and Oje, K. (2014). Effevts of Temperature, Pretreatment and Slice Orientation on the Drying Rate and Post Drying Qualities of Green Plantain (Musa Paradisiaca).International Journal of Technology Enhancements and Emerging Engineering Research, 2 (7): 92-99. ISSN 2347-4289.
30 Olaniyan, A.M. and Obajemihi, O.I (2014). Design, Development and Test of a Small Scale Mango Juice Extractor.Journal of Agricultural Science and Technology B, 4 (1): 1-7. Published by David Publishing Company, USA.ISSN 1939-1250.
31 Olaniyan, A.M. and Oje, K. (2013). Process Conditions Governing Mechanical Expression of Shea Butter from Crushed Shea Kernel under a Uni-axial Compression.International Journal of Engineering Research in Africa (JERA), 10: 37-48. Published by Trans Tech Publications, Swirzerland (Indexed in SCOPUS).
32 Olaniyan, A.M. and Omoleyomi, B.D. (2013). Characteristics of Okra under Different Process Pretreatments and Different Drying Conditions.Journal of Food Processing and Technology, 4 (6): 1-6. (http://dx.doi.org/10.4172/2157-7110.1000237).
33 Olaniyan, A.M. and Odewole, M.M. (2013). Design and Development of a Livestock Feed Mixer with a Spring-Controlled Packaging Unit. International Journal of Engineering Research in Africa (JERA), 9: 43-55. Published by Trans Tech Publications, Swirzerland (Indexed in SCOPUS).
34 Olaniyan, A.M. and Yusuf, K.A. (2012). Mechanical Oil Expression from Groundnut (Arachidhypogaea L) Kernels using a Spring-Controlled Hydraulic Press. Journal of Agricultural Research and Development (JARD), 11 (2): 235-247. Published by Faculty of Agriculture, University of Ilorin, Ilorin, Nigeria.
35 Omodara, M.A. and Olaniyan, A.M. (2012). Effects of Pre-Treatments and Drying Temperatures on Drying Rate and Quality of African Catfish (Clariasgariepinus).Journal of Biology, Agriculture and Heathcare, 2 (4): 1-10. Published by International Institute of Science, Technology and Education, Hong Kong.www.iiste.org. (www.iiste.org).
36 Omodara, M.A.; Olaniyan, A.M. and Afolayan, S.S. (2012).Effects of Drying Temperatures on the Drying Rate and Quality of African Catfish.African Journal of Agricultural Research and Development, 5 (2): 52-60.Published by Devon Science Publications, Nsukka, Nigeria.ISSN 2141-0097.
37 Olaniyan, A.M. (2012). Development of a Small Scale Machine for Recovering Bush Mango Kernel from Bush Mango Nut.Advanced Materials Research, 367: 711-723.Published by Trans Tech Publications, Swirzerland.(Indexed in SCOPUS).
38 Olaniyan, A.M. andBabatunde, O.O. (2012). Development of a Small Scale Sugarcane Juice Extractor using a Screw Pressing System.Advanced Materials Research, 367: 609-709. Published by Trans Tech Publications, Swirzerland (Indexed in SCOPUS).
39 Olaniyan, A.M. and Oje, K. (2011). Development of Model Equations for Selecting Optimum Parameters for Dry Process of Shea Butter Extraction.Journal of Cereals and Oilseeds, 2 (4): 47-56 (www.academicjournals.org/jco).
40 Olaniyan, A.M. (2010). Effect of Extraction Conditions on the Yield and Quality of Oil from Castor Bean.Journal of Cereals and Oilseeds, 1 (1): 24-33 (www.academicjournals.org/jco).
41 Olaniyan, A.M. (2010). Development of a Manually Operated Expeller for Groundnut Oil Extraction in Rural Nigerian Communities.Asia-Pacific Journal of Rural Development, 20 (1): 185-201. Published by Centre of Integrated Rural Development for Asia and Pacific (CIRDAP), Bangladesh.
42 Belewu, M.A; Adekola, O.F.; Adebayo, G.B.; Ameen, O.M.; Mohammed, N.O; Olaniyan, A.M.; Adekola, F.A. and Musa, A.K. (2010). Physicochemical Characteristics of Oil and Biodiesel from Nigerian and Indian Jatropha Curcas Seeds. International Journal of Biological and Chemical Sciences, 4 (2): 524-529. (http//:indexmedicus.afro.who.int).
43 Olaniyan, A.M. (2010). Development of a Small Scale Orange Juice Extractor. Journal of Food Science and Technology-Mysore, 47 (1): 105-108 (ISSN: 0022-1155; E_ISSN: 0975-8402).Published by Springer (Indexed in SCOPUS).
44 Oyeleke, F.I. and Olaniyan, A.M. (2008). Extraction of Juice from some Tropical Fruits using a Small Scale Multi-Fruit Juice Extractor.Nigerian Journal of Technological Development, 6 (2): 53-60. Published by the Faculty of Engineering and Technology, University of Ilorin, Ilorin, Nigeria.
45 Olaniyan, A.M. and Oje, K. (2007). Development of Mechanical Expression Rig for Dry Extraction of Shea Butter from Shea Kernel.Journal of Food Science and Technology-Mysore, 44 (5): 465-470 (ISSN: 0022-1155; E_ISSN: 0975-8402). Published by Springer (Indexed in SCOPUS).
46 Olaniyan, A.M. and Oje, K. (2007). Quality Characteristics of Shea Butter Recovered from Shea Kernel through Dry Extraction Process. Journal of Food Science and Technology-Mysore, 44 (4): 404-407. ISSN: 0022-1155; E_ISSN: 0975-8402. Published by Springer (Indexed in SCOPUS).
47 Olaniyan, A.M. (2006). Development of Small Scale Equipment for Parboiling Raw Shea Nuts.Journal of Food Science and Technology-Mysore, 43 (2): 121-126. ISSN: 0022-1155; E_ISSN: 0975-8402. Published by Springer (Indexed in SCOPUS).
48 Alonge, A.F. and Olaniyan, A.M. (2006). The Effect of Dilution Volume, Water Temperature and Pressing Time on Oil Yield from Thevetia Kernel during Extraction.Agricultural Mechanization in Asia, Africa and Latin America, 37 (2): 79-83 (ISSN: 0084-5841). (Indexed in SCOPUS).
49 Alonge, A.F.; Olaniyan, A.M.; Oje, K. and Agbaje, C.O. (2004). Development of a Screw Press for Village Level Groundnut Oil Extraction.Journal of Agricultural Engineering and Technology, 12: 46-53. Published by the Nigerian Institution of Agricultural Engineers.
50 Alonge, A.F. and Olaniyan, A.M. (2003). Effect of Processing Factors on Oil Yield of Shea Butter during Wet Extraction.Nigerian Journal of Technological Development, 3 (2): 126-133. Published by the Faculty of Engineering and Technology, University of Ilorin, Ilorin, Nigeria.
51 Alonge, A.F.; Olaniyan, A.M.; Oje, K. and Agbaje, C.O. (2003). Effects of Dilution Ratio, Water Temperature and Pressing Time on Oil Yield from Groundnut Oil Expression.Journal of Food Science and Technology-Mysore, 40 (6): 652-655 (ISSN: 0022-1155; E_ISSN: 0975-8402). Published by Springer (Indexed in SCOPUS).
52 Oje, K. and Olaniyan, A.M. (2003). Some Engineering Properties of ThevetiaNut.Advances in Agricultural Engineering, 1 (3): 10-20. Published by Research Communications, Lagos, Nigeria.
53 Olaniyan, A.M. (2002). A Study into the Strength Parameters of Shea Kernel as related to Processing. Nigerian Journal of Technological Development, 2 (2): 110-119. Published by Faculty of Engineering and Technology, University of Ilorin, Ilorin, Nigeria.
54 Olaniyan, A.M. and Oje, K. (2002). Some Aspects of the Mechanical Properties of Shea Nuts. Biosystems Engineering, 81 (4): 413-420. (ISSN: 1537-5110; E_ISSN: 1537-5129). Published by Elsevier (Indexed in SCOPUS).
55 Olaniyan, A.M. and Oje, K. (2002). Strength Properties of Shea Butter Nuts under Compressive Loading. Nigerian Journal of Technology, 21 (1): 9-17. Published by Faculty of Engineering, University of Nigeria, Nsukka, Nigeria.

Engr. Dr. Folasayo Titilayo FAYOSE
ASSOCIATE PROFESSOR
PhD, MNIAE, MNSE ,Reg.COREN
Profile
Engr. FAYOSE, Folasayo Titilola PhD
Phone: 08035862761
Email: folasayo.fayose@fuoye.edu.ng
Office: Associate Professor
Summary of Profile
Dr. Fayose Folasayo Titilola holds a Ph. D in Agricultural Power and Machinery Engineering. from the Department of Agricultural Engineering, Federal University of Technology, Akure in 2009. She benefited from the following academic awards: Ondo State Government Scholarship (1989/90); Federal Government Post Graduate Scholarship (1992/93), Ondo State Government Post Graduate Scholarship (2003/2004), PostDoc Fellowship of the African Women in Agricultural Research and Development Award, Nairobi, Kenya (2011) and Post Doc Research Fellowship Programme of the Tshwane University of Technology, South Africa (2013/14). She is a recipient of other awards like the 2013 NRF/KIC South Africa travel award, TETFUND research grants and travel grants etc. Dr Fayose conducts research with passion. She initiated, successfully sourced for fund and convened many of the research projects that were undertaken by the Department of Agricultural and Bioresesources Engineering. Her research interest bothers on identification, development, utilization, and optimization of agricultural machines for alleviation of drudgery and reduction of human intervention in agricultural production lines. She has served in various capacities both in public service and at tertiary institutions since 1992. Dr Fayose is a community youth leader, a COREN Registered Engineer and member of several professional bodies including the Nigerian Institution of Agricultural Engineers (NIAE); Nigerian Society of Engineers, (NSE); Third World Organization of Women in Science (TWOWS), American Society of Agricultural and Biological Engineers (ASABE), Women in Technical Education (WITED)and India Society of Agric. Engineers (ISAE). She has over 40 publications in reputable journals and peer reviewed conference proceedings in the area of Farm Power and Crop Processing Machinery. She has a working knowledge of Computer Aided Engineering Applications like Ansys, CAE Linux, Microsoft office, AUTOCAD and Windows and Linux Operating System, Learning Management System (LMS), Statistical Analysis Systems (SAS) Programming and Analysis and Teaching and Learning with Technology(TLwT) skills. She is happily married with children.
Specialization: Farm Power and Crop Processing Machinery
RECENT PUBLICATIONS
- Oladipo, A.S., Fayose, F. T. and Omofunmi, O.E (2020). A Review of the Performance of Made in Nigeria Yam Processing Machines. Journal of research in forestry, wildlifeandenvironmentVol12(4):135-141.
- (ii) Fayose, F. T. and Huan Z. (2019). Cassava Flour Substitution and Moisture Content Variation on some Quality Characteristics of Heat Pump Dried Extruded Fish Feed. Journal of Natural Sciences, Engineering and Technology, Vol. 19: 11-21. A publication of the Federal University of Agriculture, Abeokuta Nigeria
- (iii)Folasayo Fayose, Zhongjie Huan (2019). Computational Fluid Dynamics (CFD) Modelling of the Heat Pump Drying of Banana: Preliminary Studies, FUOYE Journal of Engineering and Technology, Vol 4(2) page 1-6. A publication of the Faculty of EngineeringFederalUniversityOye,Oye-Ekiti,Nigeria.ISSN:2579-0617
- Folasayo Fayose, Samuel Adejuyigbe, BabatopeAlabadan, Adesoji Olaniyan, Theophilus Babalola, Sunday Ogunjimi, Oluwafemi Aladejebi, BayodeOlorunfemi (2018). Design of a Cooling System for a Food Extruder, Journal of Emerging Trends in EngineeringandAppliedSciences(JETEAS)9(4):211-217.
- (v) Folasayo T. Fayose, Agboola S. Ogunlowo, Leo A. Agbetoye (2017) The design, fabrication and preliminary testing of an indigenous single screw extruder, Journal ofEngineering Science and Technology, Taylor University, Malaysia. Vol. 12, No. 10,2585 –2598(Scopusindexed)
- (Folasayo Fayose and Zhongjie Huan (2016). Heat Pump Drying of Fruits and Vegetables: Principles and Potentials for Sub-Saharan Africa. International Journal of Food Science, Volume 2016, Article ID 9673029, pp 1-8, Hindawi Publishing Corporation,http://dx.doi.org/10.1155/2016/9673029(Scopusindexed)
- Folasayo T. Fayose and Zhongjie Huan (2014). Specific Mechanical Energy Requirement of a Locally Developed Extruder for the Processing of Selected Starchy Crops, Food Science and Technology Research, 20 (4): 793-798. Published by Japanese SocietyofFoodScienceandTechnology. (Scopusindexed)

Engr. Dr. Adesola Adebanjo SATIMEHIN
ASSOCIATE PROFESSOR
PhD, MNIAE, MNSE ,Reg.COREN
Profile
Engr. SATIMEHIN, Adesola Adebanjo PhD
Phone: -234(0)7032738029
Email: adesola.satimehin@fuoye.edu.ng
Office: Associate Professor
Summary of Profile
Engr. Dr. Adesola AdebanjoSATIMEHIN is a Reader in the Department of Agricultural and Bioresources Engineering of the Federal University Oye-Ekiti. His area of expertise is Agricultural postharvest processing and storage engineering with emphasis on food drying, food-moisture equilibria and food stability. His research interests also include modeling of food processing systems, food packaging, engineering properties of food and agricultural materials as well as agricultural waste conversion.
Dr.Satimehinhas successfully supervised and co-supervised many students at Masters and PhD Degree levels. He is widely published in numerous national and international high impact journals and is currently a reviewer to many reputable journals. Hehas attended and presented scholarly papers at various international conferences held in such places as Ottawa, Paris, and Budapest to mention a few.
Dr. Adesola Satimehin has benefited from a number of scholarships and awards including Undergraduate and Postgraduate Scholarship Awards of the Federal Government of Nigeria for Agricultural Engineering. He was similarly awarded a World Bank/NUC Study Fellowship at the University of Guelph, Guelph, Ontario, Canada.
Dr.Satimehin has held a wide variety of administrative positions. He served as the pioneer Head of Department of Agricultural and Bioresources Engineering at the Federal University Oye-Ekiti. He is also the pioneer Director of SIWES Unit of the University: a position he held since 2014 till the present time. Dr.Satimehin has been a member of Senate of the University and boldly sat on many sensitive Committees including highly risky investigative panels. He is currently the Chairman of the Faculty of Engineering Conference Committee.
As a professional engineer, Engr. Dr. Adesola Satimehin is duly registered with the Council for Regulation of Engineering in Nigeria (COREN). He is a Fellow of Nigerian Institution of Agricultural Engineers (NIAE), Member American Society of Agricultural and Biological Engineering (ASABE), and an Affiliate Member of Nigerian Institute of Food Science and Technology (NIFST).
Dr.Satimehin has at various times been engaged in numerous community development services. He served as a Resource Person in COREN Accreditation Visitation to the Agricultural Engineering Program of some Universities. He was the Lead Consultant to USAID-Nigeria in the Development of a Dried Fruit and Vegetable Operations Manual for the Nigeria Expanded Trade and Transport (NEXTT) Project. Dr.Satimehin was the Consultant (Agro-Processing) in a multidisciplinary team of experts that carried out Infrastructural facilities study of the Adani/Omor Staple Crop Processing Zone on behalf of the Federal Ministry of Agriculture and Rural Development / African Development Bank (AfDB) being an aspect of the Agricultural Transformation Agenda of the Federal Government of Nigeria. He once served as National Expert/Consultant (Agro-Processing) for UNIDO/UNDP and conducted a study on Climate Change Adaptation with emphasis on Rice Postharvest Processing and Value Addition in Agatu Local Government Area of Benue State, and designed a one metric tonne/hour rice processing plant at Obagaji for rice processors in the community.
Dr. Adesola Satimehin is a self-motivated and highly sociable personality who leads in major neighborhood and community development projects. He was once the Chairman of the Benue State Chapter of the Nigerian Institution of Agricultural Engineers (NIAE). He is an ordained Elder in the Living Faith Church Worldwide and a committed and respected leader in his place of worship. Dr. Adesola Satimehin is a devoted family person who engages in walking and jogging to maintain physical fitness.
Specialization: Agricultural postharvest processing and storage engineering
Publications:
1 |
Kunle Oni, Ademola E. Adeleke, Tunde O. Ogundana and Adesola A. Satimehin. (2020).Fuel Characterization of Agro-wastes and Briquettes Produced from Rice Husk, Groundnut Shell and Corncob Blends. FUOYE Journal of Engineering and Technology (FUOYEJET), Volume 5, Issue 1, pp. 17-21. ISSN: 2579-0625 (Online), 2579-0617 (Paper) http://engineering.fuoye.edu.ng/journal/index.php/engineer/article/view/415/pdf |
2 |
Omofunmi, O. E., Satimehin, A. A., Adeleke, A, E., Ogunleye, K.S. and Alli, A.A (2020). Food Security, Sustainability and Post-Harvest Technology As A Tripod for National Security.FUOYE Journal of Pure and Applied Sciences, Vol 5(1): 68-77. A publication of the Faculty of Science, Federal University Oye-Ekiti.ISSN: 2616-1419. www.fuoye.edu.ng |
3 |
Satimehin A. A., Omofunmi O. E., Uzua, M.M. (2019). Status of Postharvest Processing Operations of Soybeans in Rural Nigeria: A Case Study of Benue North-West Senatorial Zone.LAUTECHJournal of Engineering and Technology.13(2): 70-80.A publication of the Faculty of Engineering and Technology, Ladoke Akintola University of Technology, Ogbomoso, Nigeria. Print ISSN: 1596-2490, Electronic ISSN: 2672-5940. |
4 |
Satimehin A. A., Omofunmi O. E., Adegoke A. O., Oloye A. O. (2019). A Technical Survey of Postharvest Processing Operations of Cassava in Ekiti State, South-West Nigeria.LAUTECHJournal of Engineering and Technology 13(1): 13-25. A publication of the Faculty of Engineering and Technology, Ladoke Akintola University of Technology, Ogbomoso, Nigeria. Print ISSN: 1596-2490, Electronic ISSN: 2672-5940, |
5 |
Audu, J., Irtwange, S.V. and Satimehin, A.A.(2018). Thermal Properties of Jatropha Seeds. Arid Zone Journal of Engineering, Technology and Environment, Vol. 14(3):437-449. A publication of the Faculty of Engineering, University of Maiduguri, Maiduguri, Nigeria. Print ISSN: 1596-2490, Electronic ISSN: 2545-5818 |
6 |
Audu,J., 1Irtwange, S.V. and Satimehin, A. A.(2018).Flow Properties of Jatropha Seed. Adeleke University Journal of Engineering and Technology [AUJET] Vol. 1, No 1, 81-88 aujet.adelekeuniversity.edu.ng |
7 |
Olorunwa Eric Omofunmi and Adesola Adebanjo Satimehin (2018). Performance Comparison Between Locally Developed Aerators and Its Effects on Catfish Effluent. ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Tome XVI, Fascicule 3: 113-120. A publication of the Faculty of Engineering, University Politehnica Timisoara, Hunedoara, ROMANIA. ISSN 1584 - 2665 (printed version); ISSN 2601 - 2332 (online); ISSN-L 1584-2665. http://annals.fih.upt.ro |
8 |
Satimehin, Adesola A. (2017). Kinetics of Gelatinized White Yam (DioscoreaRotundata, Poir) During Convective Drying.FUOYE Journal of Engineering and Technology, Volume 2, Issue 2, pp 47-52. ISSN: 2579-0625 (Online), 2579-0617 (Paper), A publication of the Faculty of Engineering, Federal University Oye-Ekiti. http://engineering.fuoye.edu.ng/journal/index.php/engineer/article/view/127 |
9 |
Satimehin, Adesola A. and Terseer M. Akaayar (2017). Determination of Selected Moisture-Dependent Physical and Frictional Properties of Shelled Egusi Melon (Citrullus lanatusThunb.). FUOYE Journal of Engineering and Technology, Volume 2, Issue 1, pp 118-123. March 2017 ISSN: 2579-0625 (Online), 2579-0617 (Paper). A publication of the Faculty of Engineering, Federal University Oye-Ekiti. http://engineering.fuoye.edu.ng/journal/index.php/engineer/article/view/112 |
10 |
Omofunmi, O. E, Satimehin, A. A., Olasunkanmi, J. B., Akinsorotan, A. M., Oloye, O. A, Umego, M. O and Ogunleye, K. S. (2017). Evaluation of Ground and Surface Waters around Dumpsites in Ado-Ekiti, Nigeria. FUOYE Journal of Agriculture and Human Ecology,1(3): 47-58. A publication of the Faculty of Agriculture, Federal University Oye-Ekiti. |
11 |
Audu, J.; Irtwange, S.V.; Satimehin, A.A. (2017). Aerodynamic Properties of Jatropha Seeds. International Journal of Scientific Engineering and Science Volume 1, Issue 8, pp. 5-11, 2017. ISSN (Online): 2456-7361 5 http://ijses.com/ |
12 |
Satimehin Adesola A. (2014). A Mathematical Model for Deep Bed Drying of Gelatinized White Yam (Dioscorearotundata, Poir). International Journal of Energy Engineering, 4(2A): 33-39. doi:10.5923/j.ijee.201401.05. |
13 |
Satimehin A. A., and T. K. Philip. (2012). Physical properties of acha as affected by moisture content. Agricultural Engineering International: CIGR Journal, 14(4): 231-237. A publication of CIGR - the International Commission of Agricultural and Biosystems Engineering (Japan). http://www.cigrjournal.org/index.php/Ejounral/article/viewFile/2188/1686 Indexed in Scopus database (Impact Factor = 0.406) |
14 |
Satimehin, A.A., Alakali, J.S. and Alabi, O.T. (2010). Thin-Layer Drying Characteristics of Plantain (Musa Paradisiaca) Chips. Agro-Science Journal of Tropical Agriculture, Food, Environment and Extension, 9(1): 31-37. January 2010. A publication of the Faculty of Agriculture, University of Nigeria, Nsukka. |
15 |
Alakali Joseph, Irtwange Simon Verlumun and Satimehin Adesola (2009). Moisture adsorption characteristics of ginger slices, (Food Science and Technology, Campinas)Ciência e Tecnologia de Alimentos, vol.29 no.1, Campinas Jan./Mar. 2009. A Publication of SociedadeBrasileira de Ciência e Tecnologia de Alimentos, Print version ISSN 0101-2061, Onine version ISSN 1678-457X. http://www.scielo.br/scielo.php?pid=S0101-0612009000100024&script=sci_arttext http://dx.doi.org/10.1590/S0101-20612009000100024 Indexed in ISI and Scimagodatabase (Impact Factor = 0.46) |
16 |
Alakali, J. S. and Satimehin, A. A. (2009). Moisture Adsorption Characteristics of Ginger (Zingiber officinale) Powders. Agricultural Engineering International: the CIGR Ejournal. Manuscript 1286. Vol. XI. July, 2009. A publication of CIGR - the International Commission of Agricultural and Biosystems Engineering (Japan). http://www.cigrjournal.org/index.php/Ejounral/article/viewFile/1286/1227 Indexed in Scopus database (Impact Factor = 0.406) |
17 |
S.E. Obetta, A.A. Satimehin and O.J. Ijabo. Evaluation of a Ventilated Underground Storage for Cocoyams (Taro). Agricultural Engineering International: the CIGR Ejournal. Manuscript FP 07 017. Vol. IX. November, 2007. A publication of CIGR - the International Commission of Agricultural and Biosystems Engineering (Japan). Indexed in Scopus database (Impact Factor = 0.406) |
18 |
Alakali, J. S. and Satimehin, A. A. (2007). Moisture Adsorption Characteristics of Bambara Groundnut (Vigna subterranea) Powders. Agricultural Engineering International: the CIGR Ejournal. Manuscript FP 07 005. Vol. IX. November, 2007. A publication of CIGR - the International Commission of Agricultural and Biosystems Engineering (Japan). https://ecommons.cornell.edu/handle/1813/10652 Indexed in Scopus database (Impact Factor = 0.406) |
19 |
Alakali, J. S. and A. A Satimehin (2004). Drying kinetics of ginger. Nigerian Food Journal, 22(1):105-111. A publication of the Nigerian Institute of Food Science and Technology. |
20 |
Umogbai, V. I. and A. A. Satimehin. (2004). Development and Performance Evaluation of a Modified Environment Storage Structure for Fresh Fruits and Vegetables. Journal of Prospects in Science, 7: 17-21. A publication of the Faculty of Science, Lagos State University, Lagos. |
21 |
Satimehin, A. A. and G. O. I. Ezeike (2003). Moisture desorption characteristics of gelatinized white yam (Dioscorearotundata, Poir). Nigeria Food Journal, 21: 99 -105. A publication of the Nigerian Institute of Food Science and Technology. |
22 |
Satimehin, A. A., O. M. Akinremi and O. J. Ijabo (2003). Rheological behaviour of palm oil. Science Forum: Journal of Pure and Applied Sciences, 6(2): 291-297. A publication of the Faculty of Science, Abubakar Tafawa Balewa University, Bauchi.ISSN 1119-4618. http://www.atbuscienceforum.com/?sec=archive |
23 |
Itodo, I.N., S.E.Obetta, A.A. Satimehin (2002). Evaluation of a solar crop dryer for rural applications in Nigeria. Botswana Journal of Technology, Vol. 11, No. 2 pp 58-62.http://www.ajol.info/index.php/bjt/article/view/15357. A publication of the Faculty of Engineering and Technology, University of Botswana, Gaborone. |
24 |
Ijabo, O. J., A. A. Satimehin and M. O. Iwe (2000). Effect of heat treatments on cooking time of locust bean (Parkiaclappertonianna). Nigerian Food Journal, 18: 49-56. A publication of the Nigerian Institute of Food Science and Technology. |
Papers in Conference Proceedings
25 |
Satimehin, A. A.,Oluwamukomi, M. O., Enujiugha, V. N. and Bello, M. (2018). Drying Characteristics and Mathematical Modeling of the Drying Kinetics of Oyster Mushroom (PleurotusOstreatus). Proceedings of the First FUOYE International Engineering Conference held at The Faculty of Engineering Lecture Theatre, Federal University Oye-Ekiti (Ikole Campus), Nigeria from 25th -26th July, 2018. Pages 145-151 http://engineering.fuoye.edu.ng/500-l/91-1st-fuoye-international-engineering-conference |
26 |
Oni, O.K., Satimehin, A.A. and Adeleke, A.A. (2018). Design, Fabrication and Performance Evaluation of A Dough Mixing Machine. Proceedings of the First FUOYE International Engineering Conference held at The Faculty of Engineering Lecture Theatre, Federal University Oye-Ekiti (Ikole Campus), Nigeria from 25th -26th July, 2018. Pages 170-199 http://engineering.fuoye.edu.ng/500-l/91-1st-fuoye-international-engineering-conference |
27 |
Audu, J., Irtwange, S.V. and Satimehin A.A. (2018). Pressure Drop and Flow Resistance of Jatropha Seeds. Proceedings of the First FUOYE International Engineering Conference held at The Faculty of Engineering Lecture Theatre, Federal University Oye-Ekiti (Ikole Campus), Nigeria from 25th -26th July, 2018.Pages 370-387 http://engineering.fuoye.edu.ng/500-l/91-1st-fuoye-international-engineering-conference |

Engr. Emmanuel Sunday AJAYI
Lecturer I
MSc, PhD (In View) MNIAE, MNSE, Reg. COREN
Profile
Engr. AJAYI, Emmanuel Sunday
Phone: -234(0)8039152430
Email: emmanuel.ajayi@fuoye.edu.ng
Office: Lecturer I
Summary of Profile
Emmanuel S. Ajayi is a Lecturer I in the department of agricultural & bioresources engineering in the faculty of engineering, Federal University Oye - Ekiti (FUOYE). He is currently a PhD candidate at University of Florida, Gainesville, United States of America in the department of agricultural & biological engineering. He holds a University of Florida's Herbert Wertheim College of Engineering Graduate Certificate in Biological Systems Modeling. His research areas include biological systems modeling and agricultural structures. He studied civil engineering at the University of Ilorin, Nigeria before proceeding to University of Ibadan, Nigeria for his master’s degree in agricultural & environmental engineering with specialization in structures & environment. He did the compulsory National Youth Service Corps (NYSC) at the Ministry of Works & Transport, Gusau, Zamfara State, Nigeria as an assistant resident engineer in the department of civil engineering.
Before transferring (from Nigerian Stored Products Research Institute - NSPRI) his service to Federal University, Oye – Ekiti as Lecturer II, he has worked as a laboratory technician, civil engineer and as a research officer at NSPRI where he was engaged in the areas of analysis, design, and construction of storage (such as inert atmosphere silo, packing house, barns among others) and agro – processing structures, and postharvest research. He also served at various committees and was a member of Institute’s Board of Survey. He is a registered engineer (Council for the Regulation Engineering in Nigeria) and member of Nigerian Society of Engineers (NSE), Nigerian Institution of Agricultural Engineers, and American Society of Agricultural and Biological Engineers. He is a MASHAV scholar, in 2012, he attended the International Research & Development Course on Agricultural Engineering Technologies at the Volcani Centre, Bet-Dagan, Tel-Aviv, Israel.
Specialization:Structures and Environmental Engineering
Selected Publication
- Alabadan, B. A, Ajayi, E. S, Ilesanmi, O. A and M. Nlemogu, M. 2014. Comparative Analysis of Two Optimization Models for Prediction of Compressive Strength of Lateritic Block. International Journal of Scientific & Engineering Research, Vol. 5(11): 743 – 749.
- Adetunji, C. O., Omojowo, F. S. and Ajayi, E. S. 2014. Effects of Opuntia Cactus
Mucilage Extract and Storage under Evaporative Coolant System on the Shelf Life of Carica papaya Fruits. Journal of Agrobiotech. Volume 5, pp 49 – 66. ISSN 1985 – 5133 (Press); ISSN 2180 – 1983 (Online).
- Ajayi, E. S; Jonathan, G; and Mugah, E. O. 2013. Diurnal and Night Change in
Greenhouse's Microclimatic Condition. The Nigerian Journal of Technological Research. Volume 8, Number 2; pp 17 - 21. 10.4314/njtr.v8i2.96691.
- Ajayi, E. S. 2012. Effect of Lime Variation on the Moisture Content and Dry Density of Lateritic Soil in Ilorin, Nigeria. International Journal of Forest, Soil and Erosion (IJFSE). Volume 2, Issue 4, pp 159 - 162. Online at www.ijfse.com.
- Adetunji, C. O; FawoleO .B;Arowora K. A; Nwaubani I;Ajayi E. S;Oloke J. K; Majolagbe O.N Ogundele B. A; Aina J. A; Adetunji J. B. 2012. Quality and Safety of Citrus Sinensis Coated with Hydroxypropylmethylcellulose Edible Coatings Containing Moringa Oleifera Extract Stored at Ambient Temperature. Global Journal of Science Frontier Research (G) Bio-Tech & Genetics. Volume XII, Issue V, Version 1, pp 29 – 33.
- Adetunji, C. O; Fawole O. B; Arowora K. A; Nwaubani S. I; Ajayi E. S; Oloke
J.K; Majolagbe, O. M; Ogundele, B. A; Aina J.A; Adetunji J.B. 2012. Effect of Edible Coatings from Aloe Vera on Quality and Postharvest Physiology of AnanasComosus (L.) Fruit During Ambient Storage.Global Journal of Science Frontier Research (G) Bio-Tech & Genetics. Volume XII, Issue V, Version 1, pp 38 – 43.

Engr. Abraham Olusola OLOYE
Lecturer I
MSc, PhD (In View) MNSE, Reg. COREN
Profile
Engr. OLOYE, Abraham Olusola.
Telephone: -234(0)8083842780
Email: abraham.oloye@fuoye.edu.ng
Office: Lecturer I
Summary of Profile
Engr OLOYE, Abraham Olusola. is a Lecturer II in the Department of Agricultural and Bioresources Engineering. He has a National Diploma in Agricultural Engineering from the Federal Polytechnic, Ado-Ekiti and proceeded to the Federal University of Technology, Akure where he obtained his Bachelor of Engineering (B. Eng) and Master of Engineering (M. Eng) Degrees in Agricultural Engineering. He is a Registered Corporate Member of the Nigerian Institution of Agricultural Engineers (MNIAE), Nigerian Society of Engineers (MNSE) and a Registered Engineer, Council for the Regulation of Engineering in Nigeria (COREN). He joined the Service of the Federal University, Oye-Ekiti as a Lecturer II in the Department of Agricultural and Bioresources Engineering specializing in Processing and Storage Engineering. He is a Member of the University COREN and NUC Accreditation Committee and 100 Level Students Adviser for the Department. He has jointly published a scientific research publication.
Specialization: Processing and Storage Engineering
Publications:
1 Olorunwa Omofunmi*, Adesola Satimehin, Abraham Oloye, and OkwunnaUmego. (2020). Effect of Landfill Leachates on Some Water Quality Indicators of SelectedSurface Water and Groundwater at Ilokun, Ado-Ekiti, Nigeria. Makara Journal of Technology (MJT). Vol 42. No. 2; ISSN:23552786. UNIVERSITA INDONESIA. http://journal.ui.ac.id/technology [University Based]. pp.72 – 78.
2 Omofunmi, O. E., Satimehin, A. A., Adeleke, A, E., Ogunleye, K.S., Oloye, A. O. and Alli, A.A. (2020). FOOD SECURITY, SUSTAINABILITY AND POST-HARVEST TECHNOLOGY AS A TRIPOD FOR NATIONAL SECURITY. . FUOYE Journal of pure and applied sciences (FJPAS).Vol.5, Issue 1; ISSN: 2616-1419. Federal University Oye-Ekiti, Nigeria. Science.fuoye.edu.ng [University Based]. pp. 68 -77
3 Satimehin, A. A., Omofunmi, O. E., Adegoke A. O., Oloye, A. O. (2019). A TECHNICAL SURVEY OF POST HARVEST PROCESSING OPERATIONS OF CASSAVA IN EKITI STATE, SOUTH-WEST NIGERIA. Vol. 31(1). ISSN: 26725940. Ladoke Akintola Journal of Engineering and Technology. www.laujet.com. [University Based]. pp. 13 – 25
4 Oloye, A. O., Omofunmi, O. E., Alabadan, B. A., Ajisegiri, E. S. A., Ilesanmi, O. A. and Musa, M. T.(2018). Impact Assessment of different Water Sources on the Production and Acceptability of Sorghum-based Beverage. FOUYE Journal of Pure and Applied Sciences. 3(1): 148 – 154.
5 Omofunmi, O. E; Rosulu, A. O; Oketayo, O. O and Oloye, A. O. (2017). Assessment of Land
Suitability for Crop Production and Irrigation: A Case Study of Yaba College of Technology Farm Land. FUOYE Journal of pure and applied sciences (FJPAS).Vol.2, Issue 1; ISSN: 2616-1419. Federal University Oye-Ekiti, Nigeria. Science.fuoye.edu.ng (University Based). Page: 137 - 145
6 O.E. Omofunmi,A.F.Adisa, S. O. Alegbeleyeand A.O.Oloye. (2017).Impacts of Catfish
Effluents on water quality Parameters of Majidun stream, South-West, Nigeria. AZOJETE,
Vol. 13. No.3. ISSN: 2545-5818. University of Maiduguri. Nigeria. www.azojete.com.ng.
(University Based). Page: 179 – 189
7 Agbetoye, L. A. S. and Oloye, A. O. (2009). Development and Performance Evaluation of a Machine for Removing Essential Oil from Orange Rind. Proceedings of 5th CIGR Section VI International Symposium on Food Processing, Monitoring Technology in Bioprocesses and Food Quality Management, Potsdam, Germany, 31 August - 2 September, 2009. Pg. 1199 – 1204.

Engr. Oluwaseun Ayodele ILESANMI
Lecturer I
MSc, PhD (In View) MNSE, Reg. COREN
Profile
Engr. ILESANMI, Oluwaseun Ayodele
Phone: -234(0)8039194139
Email: oluwaseun.ilesanmi@fuoye.edu.ng
Office: Lecturer I
Summary of Profile
Engr. Ilesanmi, O. A. is a Lecturer I in the Department of Agricultural and Bioresources Engineering, Federal University, Oye Ekiti. A graduate of Agricultural Engineering from University of Ilorin and obtained his M.Eng in Soil and Water Engineering from The Federal University of Technology, Akure. Prior to his current role he worked with a World Bank Funded Project, Fadama III in Ekiti State and was involved in the design of agricultural structures for farmers. He is currently carrying out his PhD research with focus on the Environment and Climate Change.
Specialization: Soil and Water Engineering
Publications:
(i) Omofunmi O.E., Ilesanmi O.A. and Orisabinone T. (2019). Performance Evaluation of Hydraulic Parameters of a Developed Drip Irrigation System, Malaysian Journal Of Civil Engineering, 31:2 (2019) 9–16. (ii) Umego O., Ewemoje T. and Ilesanmi O.A. (2018). Comparative Study of Evapotranspiration Variation and its Relationship with other Climatic Parameters in Asaba and Uyo. FUOYE Journal of Engineering and Technology (FUOYEJET). (iii) Alabadan, B. A., Oloye, A. O., Ilesanmi, O. A., Ajayi, E. S., Olaniyan, A. M., and Eseyin, A. O. (2017) Comparative Analysis of Effect of Poultry Manure and NPK fertilizer on Nutritional Qualities of Green leafy Vegetables. Journal of Agriculture and Human Ecology FUOJAHE, Published by Faculty of Agriculture, Federal University Oye-Ekiti, Nigeria. (iv) Omofunmi O.E., Ilesanmi O.A. and Alli A.A. (2017). Irrigation Practice and its Management Programme in Benin-Owena River Basin Development Authority, Nigeria, FUOYE Journal of Engineering and Technology (FUOYEJET). (v) Omofunmi O. E., Adisa A. F., Alegbeleye S.O. and Ilesanmi O. A. (2017). Assessment of Catfish Effluents Management in Lagos State Nigeria, FUOYE Journal of Engineering and Technology (FUOYEJET). (vi) Ilesanmi, O. A. and Umego, O.M. (2016).Temporal Analysis of Evapotranspiration Using FAO56PM Equation for Three Agro-Ecological Stations in Nigeria. Annals of the Faculty of Engineering Hunedoara – International Journal of Engineering. 14(2): 215-220. (http://annals.fih.upt.ro/ANNALS-2016-2.html). (vii) Alabadan, B. A., Ilesanmi, O. A., Omotayo, F. S., Obidake, O. L. (2015). Determination of Optimum Overhead Tank Position on Elemebiri Community Water Distribution Network, International Journal of Scientific Research in Agricultural Sciences, 2(6):133-143. Corresponding author (http://www.ijsrpub.com/ijsras-archived-articles/2015/298-jun/490ijsras-15-53). (viii) Alabadan, B. A, Ajayi, E. S, Ilesanmi, O. A and M. Nlemogu, M. (2014). Comparative Analysis of Two Optimization Models for Prediction of Compressive Strength of Lateritic Block. International Journal of Scientific & Engineering Research, Vol. 5(11): 743 – 749. (https://www.ijser.org/onlineResearchPaperViewer.aspx?Comparative-Analysis-of-TwoOptimization-Models-for-Prediction.pdf) (ix) Ilesanmi, O. A., Oguntunde, P. G., Olufayo, A. A. (2014). Evaluation of Four ETo Models for IITA Stations in Ibadan, Onne and Kano, Nigeria. IISTE: Journal of Environment and Earth Science. 4(5): 89-97. (http://www.iiste.org/Journals/index.php/JEES/article/view/11630)

Engr. Maryjane Okwunna UMEGO
Lecturer II
MSc, MNSE, Reg. COREN
Profile
Engr. UMEGO,Okwunna Maryjane
Phone: +234(0)7032022757
Email: okwunna.umego@fuoye.edu.ng
Office: Lecturer II
Engr. UMEGOOkwunna Maryjane is a Lecturer II in the Department of Agricultural and Bioresources Engineering, Federal University Oye Ekiti. She obtained a B.Sc. in Agricultural and Bioresources Engineering from Enugu State University of Science and Technology in 2012 with First Class Honours and MSc. in Soil and Water Conservation Engineering from the University of Ibadan in 2017. She did the compulsory National Youth Service Corps (NYSC) at University of Uyo, Akwa Ibom State. She is a Registered Corporate member of the Nigerian Institution of Agricultural Engineers (MNIAE), American Society of Agricultural and Biological Engineers (MASABE) and a registered Engineer with the Council for the Regulation of Engineering in Nigerian (COREN).She has attended many Academic Conferences and Workshops within and outside Nigeria; and has jointly published some research articles in both international and local journals.
Specialization: Soil and Water Conservation Engineering
Selected Publications
- Umego, O. M., T. A. Ewemoje and H. A. Alabi. (2020). Trend analysis of reference evapotranspiration: case study of Asaba and Uyo, South-South Nigeria: CIGR Journal, 22(4): 1 – 8http://www.cigrjournal.org
- Kayode S. Ogunleye, Onyinye S. Okeke, Maryjane O. Umego and Ogbonnaya U. Ogbonnaya (2019). Extraction Behaviour of Cadmium in Biochar Amended Soils. Crop Res. 54 (3 & 4): 59-64. DOI : 10.31830/2454-1761.2019.010.
- Omofunmi, O. E., Olasunkanmi, J. B., Ogunleye, K. S., Ilesanmi, O.A., Umego, O.M& Alli, A. A. (2019). Basic and Technical Considerations for Recirculatory Aquacultural Systems. FUOYE Journal of Agriculture and Human Ecology. Vol. 3(1): 8 – 19.
- Umego O., Ewemoje T. and Ilesanmi O. (2018). Comparative Study of Evapotranspiration Variation and its Relationship with other Climatic Parameters in Asaba and Uyo. FUOYE Journal of Engineering and Technology (FUOYEJET). 3(2): 25-30.
- Omofunmi, O. E, Satimehin, A. A., Olasunkanmi, J. B., Akinsorotan, A. M., Oloye, O. A, Umego, M. O& Ogunleye, K. S. (2017). Evaluation of Ground and Surface Waters around Dumpsites in Ado-Ekiti, Nigeria. FUOYE Journal of Agriculture and Human Ecology. Vol. 1(3): 47-58.
- Uchenna O. Ogbonnaya, Ayodeji O. Oyelami, Maryjane O. Umego, Uchechukwu V. Okere, Oluwadare A. David, Sunday A. Fasina, Kirk T. Semple. (2017). Assessment of PAH Contaminated Land: Implementing a Risk-Based Approach. Environmental Technology & Innovation. http://dx.doi.org/10.1016/j.eti.2017.06.001.
- A. Ilesanmi, O. M. Umego. (2016). Temporal Analysis of Evapotranspiration using FAO56PM Equation for Three Agro-Ecological Stations in Nigeria. ANNALS of Faculty of Engineering Hubdora- International Journal of Engineering. Vol. 14(2): 215-220.